DIG Product Documents
The B092A, 3/4″ Two-Dial Hose End Timer has joined DIG’s innovative and rugged line of battery operated controllers and timers, offering simplified programming and improved monitoring of battery power for reliable operation.
Features
- 3/4” FHT inlet and MHT outlet
- Watering duration from 2 minutes to 240 minutes
- Eight watering intervals ranging from every six hours to once per week
- Low battery auto lock out to ensure the timer cannot open unless it can close
- Low energy use (less than 20 micro amps in standby mode) ensures long battery life
- Easy manual operations using a single button
- High water flow at normal water pressures
- Operates on low water flows of less than 0.5 GPM
- 14% of higher flow at 30 PSI
- High strength female hose thread connection with easy removal via spring clip
- Powered by one 9-volt alkaline battery with battery life up to one year
- Weather resistant
- Three year limited warranty
Programming options
- Eight pre-set watering durations from 2 minutes to 240 minutes
- Watering frequency: eight watering intervals ranging from every six hours to once per week
Specifications
- Operating pressure 10 PSI to 80 PSI (0.6 – 5.5 Bar)
- Flow rate up to 6.3 gpm at 30 PSI (24 L/PM at 2 Bar)
- Temperature range: 40°F to 125° F (3° C to 50° C)
- Power source: 9-volt alkaline battery (not included)
- Solenoid: durable electric motor
- Power consumption: 20 micro amps in standby mode
- Materials: body ABS, and inner parts of high-impact plastic
- Dimensions: 6″ D X 4″ W x 6.5″ H (15.2 cm X 10.0 cm X 16.2 cm)











Reviews
There are no reviews yet.