Fiberlock Technologies IAQ 6000 GEN3 Zero VOC Mold Coating, 5 Gal. Is No Longer Available

Uniquely Formulated To Resist Mold Growth On The Dry Coating Surface, Recommended For Use On A Multitude Of Surfaces & On New Structural Materials During Construction

Professionals looking for a product with the highest possible mold resistant rating should look no further!

IAQ 6000 GEN3 is a next generation VOC compliant product that is formulated with a unique fungistatic agent to resist mold growth on the dry coating surface. IAQ 6000 GEN3 is a white, tintable and durable 100% acrylic water based coating for professional use. IAQ 6000 GEN3 has successfully passed ASTM G-21 mold resistance testing with the highest possible score.

IAQ 6000 GEN3 is recommended for use on wood, plaster, wallboard, sheetrock, concrete, masonry block, primed metal and galvanized metal.

*Resists mold on the dry coating surface only

IAQ 6000 GEN3 Features

• 100% acrylic, water-based coating
• White, tintable and durable
• VOC Compliant: All US and Canada
• Tested by independent laboratories for mold resistance: ASTMG-21

When addressing mold and water damage, you need to make sure you get lasting results. That’s why pros in the remediation business adhere to industry best practices which include a three step process: Clean. Kill. Coat. Fiberlock provides the most complete, most effective products to ensure that mold and water damage issues are remediated and that your investment, health, and safety are protected.

Fiberlock’s IAQ 6000 GEN3 Zero VOC Mold Coating is step 3 in Fiberlocks “Clean. Kill. Coat.” process. Learn about part one Fiberlock Technologies IAQ Advanced Peroxide Cleaner, Check out Part two, “Shockwave”

---

How to Use

SURFACE PREPARATION

Surfaces to be coated must be free of dust, dirt, grease, loose paint, oil, glue size, calcimine, wax, soap and other surface contamination. Clean mold stained surfaces with IAQ Advanced Peroxide Cleaner, or use an EPA registered antimicrobial disinfectant cleaner such as IAQ 2000, IAQ 2500, ShockWave or ShockWave RTU. Patch irregularities with vinyl patching paste or an appropriate patching compound. IAQ 6000 GEN3 is self-priming over bare sheetrock, composition board, ceiling tile and concrete.

WALLBOARD, SHEETROCK, GYPSUM BOARD

Joint cement should be sanded smooth, but avoid abrading the paper.

APPLICATION TOOLS

Apply IAQ 6000 GEN3 with a brush, roller or airless spray equipment.

• Brush: Synthetic, nylon or polyester bristle
• Roller: Synthetic fiber 3/8” nap or longer
• Spray Settings: Pressure: 2000-3000
• P.S.I. Tips: .019 to .021 tips

TINTING

IAQ 6000 GEN3 may be tinted to any off-white or pastel based color. Add up to 2 oz. of universal colorant per gallon. Start with 50% of the tinting formula and adjust as necessary.

PRODUCT APPLICATION

IAQ 6000 GEN3 is supplied ready to use, but can be thinned sparingly with water (up to 1/2 pint water per gallon) for proper application consistency if necessary. Apply IAQ 6000 GEN3 generously and uniformly by brush, roller, or airless spray. Apply one coat of IAQ 6000 GEN3 and ensure that the finished surface is properly sealed. To ensure that the finished surface is properly sealed, two-coats may be required on some porous surfaces.

COVERAGE

• Smooth Surfaces – 250-400 sq. ft. per gallon
• Porous Surfaces – 150-300 sq. ft. per gallon

CLEANUP

Clean tools and drippings with warm soapy water before IAQ 6000 GEN3 dries. Dispose of waste according to all existing local, state and federal regulations.

PRECAUTIONS

Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, solvents or colors in oil. The IAQ 6000 GEN3 coating is resistant to mold only on the surface of the coating. No mold resistance claim is made other than to the coating itself. The use of this product does not protect users or others against food-borne or disease-causing bacteria, viruses, germs or other disease-causing organisms. Do not apply when air or surface temperature is below 50°F (10°C), or when drying conditions are poor or when surfaces are above a 15% moisture level content. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter.

For interior use only.