GardnClean Liquid Mix Chlorine Dioxide (CIO2) Disinfectant & Sanitizer

Best In Class Chlorine Dioxide

Sanitizer, Disinfectant, Line Cleaner + Continuous Water Treatment

Gard’nClean GC Liquid works by releasing chlorine dioxide gas into the solution once the sachet is added to water. The generation vessel and storage container must be sealed to prevent the ClO₂ gas from escaping.

Available Sizes:

• 2 Gallon – Makes 2 Gallons of 100 ppm Solution
• 12.5 Gallon – Makes 12.5 Gallons of 100 ppm of Solution
• 30 Gallon – Makes 30 Gallons of 100 ppm of Solution

---

The Ideal 3-Dimension Sanitation & Disinfection Product for Cultivation & Processing Facilities

• Effective against Fusarium, Pythium, Powerdy & Downey Mildew, Botrytis Gray Mold, Tobacco Mosaic Virus, Hop Latent Virus & many more
• Ships and stores dry
• Generates ultra-pure ClO₂ and zero byproducts
• Liquid lasts for up to 60 days after generation (if stored properly)
• Versatile use – replaces an entire cabinet of harmful products
• Mechanical kill action, no resistance or tolerance possible
• Kills E.coli in 60 seconds at 5ppm
• No rinse or wipe required, spray and walk away

Benefits of Ultra-Pure Chlorine Dioxide

Until recently, chlorine dioxide generation required large mechanical equipment that came at a huge expense, required intimate contact and handling of toxic precursor chemicals, and specially trained (and highly paid) operators. Gard’nClean and its patented just-add-water technology require only tap water to generate pharmaceutical-grade ultra-pure chlorine dioxide (ClO2) on-site. No hazardous chemicals or byproducts to interact with, no expensive infrastructure to purchase and maintain, and no special operators needed. Gard’nClean revolves around our patented sachet-based micro-reactor that allows anyone to safely and easily generate ultra-pure chlorine dioxide (ClO2) as a versatile liquid product, or as a direct gas application at the point of use.

---

Compare The Entire Gard’nClean Product Line

All of Gard’nClean’s products harness the power of ultra-pure chlorine dioxide. We have developed three different delivery systems to provide a comprehensive system, unlocking the true potential of this amazing molecule.

---

Directions For GC Liquid:

• 1. Generate the Gard’nClean GC Liquid solution with the provided Gard’n Clean GC Liquid sachet by adding the sachet to water for a minimum of 2 hours, a maximum of 12 hours, in a sealed container.
• 2. Remove the used Gard’n Clean GC Liquid Sachet from the mixing container and discard in a standard trash receptacle.
• 3. We recommend transferring the solution to a sealed, opaque container with a spout for easy dispensing. The solution will stay ph & ppm stable for up to 60 days if stored properly.
• 4. For disinfection, use a 100 ppm solution to spray, wipe down or mop all surfaces.

* For disinfection of large spaces, we recommend using an electrostatic sprayer or dry fogger.*

GC Liquid Usage Rates

• Disinfection/Decontamination/Sanitation/Deodorization – 100 ppm
• Heavy Bleach Replacement – 25 ppm
• General Surface Cleaning/Bleach or isopropyl Alcohol Replacement – 10 ppm
• Wash Protocol for Fruits/Vegetables – 5 ppm
• Water Treatment (Continuous Dose) – .25 ppm

For full instructions, see our Directions for Use on the label, or consult the Gard’nClean Institutional SOP.